Overview
You build the screens by dragging objects onto the canvas instead of writing code. Data logging, alarms, recipes, and multi-language switching are all handled in the same tool.
Project Setup and Device Connection
Start a new project by picking the target panel model (cMT3090, eMT3070B, and so on) and setting up the PLC connection. EasyBuilder Pro ships with over 300 PLC and device drivers, including:
- Allen-Bradley (DF1, EtherNet/IP, Micro800)
- Siemens (S7-200/300/400/1200/1500)
- Mitsubishi (FX, Q, iQ-R series)
- Modbus (RTU, TCP, ASCII)
- BACnet, OPC UA, and MQTT for IoT applications
Screen Design Best Practices
Design for the operator. Keep navigation consistent, make status obvious at a glance, and stick to a color convention the plant floor already reads (green=run, red=fault, yellow=warning). The object libraries give you gauges, tanks, valves, and motor animations to start from, and you can restyle any of them.
Simulation and Deployment
Test screens in the built-in simulator before you flash hardware. It emulates both the panel display and the PLC link, so the whole thing runs on your PC. Push the finished project over USB, Ethernet, or the cMT Viewer app when you need to update remotely.
Typical applications
- Machine operator interfaces
- Process monitoring dashboards
- Recipe management systems
- Alarm and event logging
Related products
cMT3090 • cMT3103 • eMT3070B • eMT3105P. See them on the Weintek USA page or ask us for a quote.