Copley Controls / Nano Drive Selector

Copley Nano Servo Drive Selector

Enter your supply and motor ratings. The selector checks all 24 Nano part numbers (NES, NPS, NEP, NPP, Nano HP, Nano Plus HP) and returns the smallest drive that fits, with the reasons.

Supply

Use battery low / fully charged, or supply tolerance. Max should include regen if there is no shunt.

Motor current (per axis)

Command & feedback

Continuous ≥ 6.8 AdcPeak ≥ 17 AdcBus 42–54 VRegen target 62.1 V
Recommended
NES-180-30
Nano (Standard) · EtherCAT
Current15 / 30 Adc (10.6 / 21.2 Arms)
Supply20–180 VDC
Size35 × 30 × 23.4 mm
I/O6 DI / 4 DO, 1 analog in (12-bit)
SafetySTO SIL 3 / PL e
VariantsNES-180-30, NES-180-30-D, NES-180-30-Z
  • 20–180 V input covers the 42–54 V bus
  • 15 Adc continuous vs 6.8 Adc needed (121% spare)
  • 30 Adc peak vs 17 Adc needed
  • EtherCAT built in
  • Supports Incremental A/B
  • Nano Standard meets the spec; Plus features are not required
Request a quoteOpens an email to sales@bravoat.com with your application details filled in.

Other drives that fit (7)

PartFamilyCurrentSupplyNotes
NEP-180-30Nano Plus15 / 30 Adc (10.6 / 21.2 Arms)20–180 V—
NES-090-70Nano (Standard)35 / 70 Adc (24.7 / 49.5 Arms)9–90 V—
NEP-090-70Nano Plus35 / 70 Adc (24.7 / 49.5 Arms)9–90 V—
NES-090-80-CNano HP80 / 80 Adc (56.6 / 56.6 Arms)9–90 VNo peak boost: continuous = peak rating
NEP-090-80-CNano Plus HP80 / 80 Adc (56.6 / 56.6 Arms)9–90 VPart number inferred from family listing — confirm with Copley before ordering; No peak boost: continuous = peak rating
NES-090-140-CNano HP140 / 140 Adc (99 / 99 Arms)9–90 VNo peak boost: continuous = peak rating
NEP-090-140-CNano Plus HP140 / 140 Adc (99 / 99 Arms)9–90 VNo peak boost: continuous = peak rating
Why the other 16 were rejected
PartReason
NES-090-10
Continuous 5 Adc < required 6.8 Adc (incl. 20% margin)
Peak 10 Adc < required 17.0 Adc (incl. margin)
NES-180-10
Continuous 5 Adc < required 6.8 Adc (incl. 20% margin)
Peak 10 Adc < required 17.0 Adc (incl. margin)
NPS-090-10
Continuous 5 Adc < required 6.8 Adc (incl. 20% margin)
Peak 10 Adc < required 17.0 Adc (incl. margin)
No EtherCAT interface
NPS-090-70
No EtherCAT interface
NPS-180-10
Continuous 5 Adc < required 6.8 Adc (incl. 20% margin)
Peak 10 Adc < required 17.0 Adc (incl. margin)
No EtherCAT interface
NPS-180-30
No EtherCAT interface
NEP-090-10
Continuous 5 Adc < required 6.8 Adc (incl. 20% margin)
Peak 10 Adc < required 17.0 Adc (incl. margin)
NEP-180-10
Continuous 5 Adc < required 6.8 Adc (incl. 20% margin)
Peak 10 Adc < required 17.0 Adc (incl. margin)
NPP-090-10
Continuous 5 Adc < required 6.8 Adc (incl. 20% margin)
Peak 10 Adc < required 17.0 Adc (incl. margin)
No EtherCAT interface
NPP-090-70
No EtherCAT interface
NPP-180-10
Continuous 5 Adc < required 6.8 Adc (incl. 20% margin)
Peak 10 Adc < required 17.0 Adc (incl. margin)
No EtherCAT interface
NPP-180-30
No EtherCAT interface
NPS-090-80-C
No EtherCAT interface
NPS-090-140-C
No EtherCAT interface
NPP-090-80-C
No EtherCAT interface
NPP-090-140-C
No EtherCAT interface

Ratings compiled from Copley Controls datasheets and product pages. Selection is rule-based: hard filters on voltage, current with margin, network and feedback, then ranked by the smallest adequate drive, with Nano Standard preferred over Nano Plus unless a Plus feature is required. Confirm against the current Copley datasheet before ordering.