Vendors / PBA Systems / Encoders / Absolute linear encoder

What is an absolute linear encoder?

An absolute linear encoder reports its exact position the moment it powers up, so the machine does not need to be homed. PBA Systems' PAOF series does this with a non-contact optical reader head over a stainless steel tape, and PBA says it needs no battery.

How the PAOF encoder measures

Light

Reflected, non-contact optics

  • An LED lights a graduated stainless steel tape.
  • A specially designed reticule images the reflected, diffused light onto a photodetector.
  • PBA calls this the auto-imaging principle.
Tape

Two graduations on one tape

  • Incremental graduation: generates incremental signals that are counted inside the reader head.
  • Absolute graduation: a binary code with a special sequence that does not repeat along the measuring length.
Result

Position without homing

  • True absolute, so the machine knows its position at power-up.
  • No batteries required.
  • PBA lists travel speed up to 8 m/s.

What comes with it

PartWhat PBA lists
Reader headCompact, with the optical and electronic parts in one body. Mounts from the side or the top.
Set-up LEDIntegral LED that makes installation easier.
Cable1 m or 3 m, with a 9-pin D-sub male connector.
Tape10 mm wide adhesive reflective stainless steel tape, highly resistant to solvents.

Source: PBA Systems PAOF series page, read November 19, 2026. PBA's part numbering, specifications and drawings are on its site (free registration for downloads). Confirm specifications on the datasheet before you design.

Absolute encoder questions

What is an absolute linear encoder?

PBA describes the absolute measurement system as one that directly measures machine position digitally. Because it knows where it is when it powers up, the machine does not need to be homed.

How does the PBA PAOF encoder read position?

PBA says it uses an auto-imaging principle: an LED light source, a specially designed reticule and a photodetector read diffused light reflected from a graduated stainless steel tape. The tape has an incremental graduation and an absolute graduation.

Does the PAOF encoder need a battery?

No. PBA lists no batteries required.

What ships with a PAOF encoder?

PBA lists a compact reader head with an integral set-up LED, a 1 m or 3 m cable with a 9-pin D-sub male connector, and a 10 mm wide adhesive reflective stainless steel tape that is highly resistant to solvents.

How do I get a PAOF encoder quote from Bravo?

Send the travel length, resolution, signal output and quantity. We will confirm availability and quote it, alone or together with a PBA motor and drive.

Need an encoder for your stage?

Send the travel length, resolution, signal output and quantity. We will confirm availability and quote it.