Overview
Trio Motion controllers act as the EtherCAT master directly, so they talk to EtherCAT servo drives, I/O modules, and other slaves without a separate master card. This note covers network layout, configuration, and tuning for multi-axis systems.
Trio EtherCAT Master Architecture
Trio controllers (MC4N, MC664, Flex-6 Nano) have EtherCAT master ports built in. At startup they scan the network and configure each slave on their own. The controller handles network management, Distributed Clocks sync, and error recovery, and there's no extra hardware or software license to buy.
- Automatic network scanning and slave configuration
- Distributed Clocks synchronization with sub-microsecond accuracy
- Hot-connect support for dynamic slave addition/removal
- Built-in network diagnostics and error counters
Network Design Best Practices
EtherCAT runs a line (daisy-chain) topology, up to 100m of Cat5e between nodes. Wire the drives in the order they sit on the machine and the cabling stays simple. When a straight line doesn't fit the layout, EtherCAT junction modules let you branch into a star or tree.
Cycle Time Optimization
Cycle time sets the motion update rate. Trio controllers run cycle times from 250µs to 4ms. Shorter cycles give you tighter dynamic response but eat more processing bandwidth. For most servo work, 1ms is the sweet spot between response and stability.
Minimum cycle time ≈ (N × 2.5µs) + 100µs overhead, where N is the number of slaves. A 16-axis system requires approximately 140µs of network time per cycle.Typical applications
- Multi-axis coordinated motion
- High-speed pick-and-place
- CNC and laser processing
- Packaging machinery
Related products
MC4N • MC664 • Flex-6 Nano. See them on the Trio Motion page or ask us for a quote.