Overview
Trio controllers do this coordination in firmware: linear and circular interpolation, electronic camming and gearing, and path blending for smooth continuous motion.
Linear and Circular Interpolation
Trio controllers run 2D and 3D interpolated motion, with several axes following one calculated path. Linear interpolation moves in straight lines; circular interpolation (MOVECIRC) traces arcs in any plane. The path planner works out each axis trajectory so the tool holds the programmed feedrate along the path.
- MOVE and MOVEABS for linear interpolation (up to 32 axes)
- MOVECIRC for circular arcs in 2D
- MHELICAL for helical interpolation (arc + linear)
- Programmable feedrate override (0-300%)
- Automatic acceleration/deceleration at path start/end
Electronic Camming
The CAM command ties a follower axis to a master position through a cam table you define in the controller's TABLE memory. Tables hold up to 65,536 points and use cubic spline interpolation, so motion stays smooth at any speed. You can link, reverse, and phase-shift cams while they're running.
CAM table resolution: position accuracy = travel / (N-1) where N is the number of cam points. For ±1µm accuracy over 100mm travel, use at least 100,001 points.Path Blending and Look-Ahead
Path blending removes the stops between segments when you're running a string of moves back to back. Trio controllers look ahead at the moves coming up and set the velocity at each blend point accordingly. That matters on CNC, laser cutting, and dispensing, where a stop between moves leaves a mark.
Typical applications
- CNC machining and routing
- Laser cutting and welding
- Dispensing and coating
- Robotic path planning
Related products
MC4N • MC664 • Flex-6 Nano. See them on the Trio Motion page or ask us for a quote.