Vendors / PBA Systems / PIMH encoder

PBA PIMH incremental linear magnetic encoder

The PIMH is PBA Systems' incremental linear magnetic encoder: ±ABZ RS422 output, 0.5 µm resolution, 5 m/s, and lengths up to 50 m. It reads a magnetic strip without contact and wires into almost any drive that takes a quadrature encoder. Bravo Automation Technologies is an authorized PBA distributor and quotes it across the United States.

What you get

  • Read head: 33 x 15 x 10 mm aluminum body, CNC precision carved, with a built-in LED alignment indicator.
  • Cable: 0.5 m by default, terminated in a 15-way D-sub connector. Runs up to 30 m are supported.
  • Scale: magnetic strip or ring, non-contact sensing distance under 1 mm, optimal 0.5 mm ±0.1.
  • Output: ±ABZ differential quadrature over RS422, 5 V supply, under 60 mA.
  • Sealed housing: IP67, -5°C to 70°C operating range, good resistance to impact, vibration and pressure.
PBA PIMH1 read head dimensional drawing: 33 x 15 x 10 mm body with mounting hole spacing

Dimensional drawing from PBA's datasheet. Product photo coming soon.

Build your PIMH part number

Pick the options for the read head and enter the scale length. The part numbers update as you go, laid out the same way as PBA's own part numbering chart. Press the quote button and both part numbers go straight into the request.

Part numbering system

Encoder

PIMH1
E1.0
0.5
B
00
Encoder modelPIMH1
ResolutionE1.0
Cable length0.5
ConnectorB
Design version00

Scale

PIMH1
L01000
Encoder modelPIMH1
Scale length (mm)L01000

Written as L01000. Measuring lengths up to 50 m.

EncoderPIMH1-E1.0-0.5-B-00
ScalePIMH1-L01000

Options shown are the ones on PBA's PIMH part numbering chart. Need a different resolution, cable length or connector? Ask us. We will take it to PBA.

Specifications, PIMH1

SpecificationPIMH1
Operating voltage5 V ±5%
Current consumption60 mA max, at 25°C room temperature
Resolution0.5 µm max, default 0.5 µm
Output signal±ABZ, industrial RS422 standard
Accuracy≤50 µm, sensing distance 0.2 mm
Repeatability accuracy±1 µm, sensing distance 0.2 mm
Maximum measuring length50 m, depends on the magnetic strip
Maximum speed5 m/s
Maximum cable length30 m (laboratory voltage drops to 4.75 V at full length)
Wire outlet methodDirect wire outlet, DB15
Sensor materialAluminum, CNC precision carving
Sensing distance< 1 mm, optimal 0.5 mm ±0.1
Overall dimensions33 x 15 x 10 mm
Mounting hole spacing26 mm
Matching magnetic scalePIMH1
Wire lengthDefault 0.5 m
Operating temperature-5°C to 70°C
Storage temperature-20°C to 105°C
Protection classIP67

Source: PBA Systems PIMH datasheet. Confirm against the current datasheet before you design. Ask us for the catalog and 3D drawings.

Cable

Cable typeTPU high-flexibility cable, chain-compatible, double-shielded, twisted-pair
Number of cores8
Outer diameter5.3 mm ±0.15 mm
Jacket materialTPU
Conductor0.1 mm², 28 AWG, 0.38 Ω/m
Shielding efficiency> 98%
Durability30 million cycles at a bending radius of 37 mm
WeightNominal 34 g/m
Bending (internal) radiusDynamic 25 mm, static 10 mm

Status indicator light

LightWhat it means
Blue light steady onMagnetic strip reading normal, signal output normal
Red & blue light blinkingSensing distance too large, magnetic strip damaged by magnetization
Red light steady onEncoder severely damaged
No light illuminatedEncoder severely damaged, or check if the circuit connection is open

15-way D-sub pinout

PinWire colorSignal
2Black0V
4BrownZ-
5BlueB-
6PurpleA-
7Red5V
8Red5V
9Black0V
12YellowZ+
13WhiteB+
14GreenA+
Housing—Shielding

Pins not listed here carry no connection on PBA's sheet.

Where it fits

  • Linear motor axes on drives that already read quadrature feedback, including most of PBA's own ironless and iron-core linear motors.
  • Retrofit and upgrade jobs where the existing controller expects RS422 ±ABZ and a BiSS-C absolute signal is not an option.
  • Long travel: one continuous magnetic strip up to 50 m, ordered to the length you need.
  • Washdown and harsh environments: IP67 sealed housing and good resistance to impact, vibration and pressure.

PAOF absolute linear encoder · What is an absolute linear encoder? · PBA motors and actuators · PBA application notes · Linear motion products

PIMH encoder questions

What is the PBA PIMH encoder?

PIMH is PBA Systems’ incremental linear magnetic encoder. A compact read head senses a magnetic strip or ring without touching it and outputs an industry-standard RS422 ±ABZ quadrature signal.

Incremental vs. absolute: does PIMH need homing?

Yes. PIMH is incremental, so unlike PBA’s PAOF absolute encoder, the axis needs a reference (homing) move after power-up before position is known. In exchange, ±ABZ RS422 is a near-universal feedback format that most servo drives already accept.

How do I read a PIMH part number?

A PIMH encoder is ordered as two parts. The read head, for example PIMH1-E1.0-0.5-B-00, is model, resolution, cable length, connector and design version. The scale, for example PIMH1-L01000, is model and length in millimeters (L01000 = 1000 mm).

What controller or drive does it work with?

Any drive or controller with a differential ±ABZ (RS422) incremental encoder input and a 5 V supply, wired through the 15-way D-sub connector. Send us the drive model and we will check the match before you order.

How long can the scale be?

PBA lists measuring lengths up to 50 m, depending on the magnetic strip. Enter the scale length in millimeters in the part-number builder above.

How do I get a price and lead time?

Build the part number above and press Request a quote, or call 952-212-4015. Bravo quotes PIMH encoders alone or together with a PBA motor and drive.

Quote a PIMH encoder

Send the part number from the builder, or just the travel length, your drive and the quantity. We will quote it alone or with a PBA motor and drive.