Vendors / Telesis / Dot peen markers

Telesis dot peen and scribe markers: PINSTAMP, BenchMark and controllers

Bravo Automation Technologies is an authorized distributor of Telesis marking systems. Telesis makes dot peen markers in two families, the pneumatic PINSTAMP line and the fully electric BenchMark line, plus scribe markers and the controllers that run them. Tell us the part and the mark, and we will quote the right one.

Three families, per Telesis

Pneumatic

PINSTAMP dot peen markers

  • Patented floating pin that conforms to curved and irregular surfaces.
  • Multi-pin options for faster marking, and handheld models.
  • Built for high-volume industrial marking. Telesis says the machines are handmade in Ohio.
Electric

BenchMark dot peen markers

  • Fully electric, so no compressed air is needed.
  • Select models add iZONIT vision technology.
  • BenchMark 200 has a 4.0 x 4.0 inch marking area with depths of 0.001 to 0.010 inch. BenchMark 320 with iZONIT has a 100 x 150 mm (4.0 x 6.0 inch) area.
Scribe

Scribe markers

  • A stylus dragged across the surface makes a smooth, low-noise, permanent mark.
  • Telesis calls them well suited to data plates and VIN marking.
  • SS3700 has a 6 x 2 inch window. SC5000 has a 2.5 x 7.5 inch window. The 6000VIN is designed for deep VIN marking regulations.

Which marker for which job

A starting point from Telesis's own model descriptions. We confirm the fit against your part before we quote.

If you needTelesis listsWhy, per Telesis
A bench marker on small volumes, no airBenchMark 200 or 320Compact, fully electric, plug-and-play.
Marking on curved or irregular surfacesPINSTAMP lineFloating pin follows the surface.
Faster cycles on automotive or aerospace partsPINSTAMP TMM5400Multi-pin technology for high-speed marking.
A large marking windowPINSTAMP TMP3200Large window, fast, deep marks.
A handheld or portable markerTMP4210, TMP4500E, BenchMark 460Handheld and portable designs; TMP4210 links to PLCs and host computers.
Large or cylindrical partsTMP6100 or TMP6100EArticulating arm; Telesis pairs it with a rotary device for cylindrical parts.
VIN platesSC5000, SS3700, 6000VINScribe markers sized for VIN work.

Controllers

PINSTAMP markers can run from Telesis's Merlin software on a PC, from the TMC470 fixed-button controller, or from the TMC520 touchscreen controller. Telesis says the TMC520 lets an operator build a design and make a mark in under a minute, with a preview and support for arc text, shapes, graphics and data matrix symbols.

Telesis laser marking systems · Dot peen and FDA compliance note · Traceability in manufacturing · Robotic integration note · Telesis vendor page · Laser systems

Sources, read November 19, 2026: Telesis dot peen markers, Telesis PINSTAMP comparison guide, Telesis BenchMark, Telesis PINSTAMP controllers. Confirm details on the maker's datasheet before you design.

Common questions

What is the difference between PINSTAMP and BenchMark dot peen markers?

Telesis describes PINSTAMP as its patented pneumatic line with a floating pin that follows curved and irregular surfaces, with multi-pin and handheld options. BenchMark is its fully electric line that needs no compressed air, and select models add iZONIT vision.

What is a scribe marker?

Telesis says a scribe marker drags a stylus across the part to make a smooth, low-noise permanent mark, and calls it well suited to data plates and VIN identification.

How do I get a Telesis dot peen marker quote?

Request a quote or call 952-212-4015. Tell us the material, the mark size and content, whether it is bench, handheld or automated, and the quantity. Bravo is an authorized Telesis distributor.

Need a dot peen marker quote?

Tell us the material, the mark size and content, bench, handheld or automated, and the quantity.