Overview
Copley drives speak CANopen using the DS402 (CiA 402) device profile for drives and motion. This note covers the parts you actually touch bringing one up: object dictionary access, PDO configuration, and the position, velocity, and torque modes.
CANopen Overview
CANopen is a higher-level protocol that runs on top of the CAN (Controller Area Network) physical layer. It defines standard objects for configuring devices, exchanging process data, and managing the network. Copley drives follow the DS402 profile, so they interoperate with other DS402 controllers.
Object Dictionary
Every CANopen parameter lives in the Object Dictionary, addressed by index and sub-index. Copley drives carry both the standard DS402 objects and manufacturer-specific ones for the extra features:
- Communication objects (0x1000-0x1FFF)
- Manufacturer-specific objects (0x2000-0x5FFF)
- Device profile objects (0x6000-0x9FFF)
Operating Modes
Copley CANopen drives support the DS402 operating modes:
- Profile Position Mode - Point-to-point positioning with trapezoidal profiles
- Profile Velocity Mode - Velocity control with acceleration limits
- Profile Torque Mode - Direct torque/current control
- Homing Mode - Reference point detection and setting
- Interpolated Position Mode - Synchronized multi-axis motion
- Cyclic Synchronous Position/Velocity/Torque (CSP, CSV, CST)
State Machine
DS402 defines a state machine the drive moves through: Not Ready to Switch On, Switch On Disabled, Ready to Switch On, Switched On, Operation Enabled, Quick Stop Active, and Fault. You drive the transitions by writing the Controlword object (0x6040).
Typical applications
- Multi-axis coordinated motion
- PLC-based machine control
- Industrial automation systems
- Robotics applications
Related products
Xenus Plus • Accelnet • Stepnet • Nano Series. See them on the Copley Controls page or ask us for a quote.