Overview
Plenty of machines need several axes moving in lockstep. Copley drives handle that a few ways, from plain master-follower gearing up to full cam profiles, timed by either EtherCAT Distributed Clocks or CANopen SYNC messages.
Electronic Gearing
Electronic gearing ties a follower axis to a master: the follower tracks master position times a gear ratio you set. Copley drives take integer and fractional ratios, and you can change the ratio on the fly.
- Gear ratio range: 1:1000 to 1000:1 with fractional support
- Master source: encoder input, another axis, or virtual master
- Smooth ratio transitions with configurable ramp time
- Phase offset adjustment for fine alignment
Electronic Camming
Electronic camming maps follower position to master position through any curve you define, doing the job of a mechanical cam without the hardware. Copley drives hold cam tables up to 3600 points and interpolate them with cubic splines, so the motion stays smooth at any speed.
Cam table interpolation uses cubic splines: f(x) = a + bx + cx² + dx³ for each segment, with continuity constraints ensuring smooth velocity and acceleration at segment boundaries.EtherCAT Distributed Clocks
When you need the tightest sync, EtherCAT Distributed Clocks (DC) hold every axis on the network to under a microsecond of each other. Copley EtherCAT drives support the DC Sync0 and Sync1 signals, so all axes update on the same deterministic tick.
Typical applications
- Flying shear and cut-to-length
- Printing and registration
- Coordinated robotic axes
- Conveyor tracking
Related products
Xenus Plus • Accelnet Plus • M-Series. See them on the Copley Controls page or ask us for a quote.