Overview
A servo drive, or servo amplifier, takes a low-power command signal and turns it into the voltage and current a servo motor needs, holding position, velocity, and torque to tight tolerances. It sits between the motion controller and the motor, amplifying the command and closing the feedback loop so the motor actually does what it was told.
Basic Architecture
A drive has three parts: a power stage, a control stage built on a DSP or FPGA, and its communication interfaces. The power stage chops the DC bus into PWM output to the windings. The control stage runs the cascaded feedback loops fast enough to hold precision.
- Power stage: H-bridge or 3-phase inverter topology
- Control stage: DSP/FPGA running at 10-20 kHz loop rates
- Feedback interface: encoder, resolver, or absolute position sensor
- Communication: EtherCAT, CANopen, analog, or step/direction inputs
How Servo Drives Differ from VFDs
Both drive motors, but they aren't the same tool. A servo drive runs closed-loop on position feedback, so it can position accurately and respond fast. A VFD usually runs open-loop speed control on an induction motor. A servo drive instead gives you high-bandwidth control of a PMSM or brushless DC motor.
Choosing the Right Servo Drive
What to check when you're picking one:
- Motor type compatibility (brushless, brush, stepper, linear)
- Voltage and current ratings matching the motor
- Communication protocol requirements (EtherCAT, CANopen, etc.)
- Form factor (panel mount, PCB module, chip-level)
- Safety features (STO, SBC) if required
Typical applications
- Industrial automation and robotics
- Semiconductor manufacturing
- Medical device positioning
- Packaging and printing machinery
Related products
Xenus Plus • Accelnet Plus • Nano Series • Accelus. See them on the Copley Controls page or ask us for a quote.